An essential part of your treatment is the CPAP machine if you have problems with sleep apnea. It is tremendously important for the well-being and longevity, together with your well-being of the machine, to correctly clean it; and regrettably, it cannot merely throw. Recall the apparatus is helping you breathe, and you are inhaling whatever may be growing in there if left unclean.

The procedure can take up to 45 minutes as there are many elements that need to come and be sanitized although pretty simple. Here are 9 easy steps to your cleaner, healthier CPAP machine.


The machine or any comparable parts cleans with a cleaning solutions or booze containing alcohol. Using these solutions can damage the functionality of your machine by deforming or hardening the flexible plastic parts of the system.

Soak. Immerse the mask, tube, headgear, and connectors for about thirty minutes. Is up let the parts air dry.

1) Clean The Humidifier. Always use distilled water in your humidifier to prevent mineral build-up. After the heater plate has cooled, remove in the top of the chamber and remove the chamber in the heater foundation. Wash the chamber top, foundation, deflector, and supply tube in warm soapy water mixture. Rinse, washing all soap residue allow to air dry and clean.

2) Reassemble. Reassemble after you have let all parts to completely air dry. Join the headgear to the tube to the humidifier and the mask, the mask to the tube or to the CPAP machine. Turn on the machine and listen for any air flows which you did not notice before disassembly.

3) Unplug The Machine. You are going to be cleaning the machine with water, and as we all (hopefully) learned at a young age Water and electricity are enemies!

4) Disconnect Your Mask. No matter which type of mask you use with your CPAP machines, atmosphere is all distributed by them from mouth or the nose and all can be cleaned precisely the same manner. If your mask has one, separate the mask and swivel in the tube, like the headgear to disconnect. Take them away too if you’ll find parts that can readily put back on. The more comprehensive job you are doing, the better your machine will run. (Although it is not compulsory that you simply remove support band, spacer, or rotating connector in the Respironics mask before cleaning it, you can to get a more through clean).


5) Disconnect The Tube. It is significant form any humidifiers or the tube is taken from the CPAP machine.

6) Different CPAP Machine From Humidifier. If you’ve got one remove the humidifier unit from your CPAP machine, and break it down into its bits that are smaller. Divide as much as possible if the bits are overly hard to remove and continue to the following measure.

7) Clean The Outside Extremities Of The Machine. Get a fabric that is soft and moisten it with warm water and wipe the outside surfaces of the machine down. (While its unplugged, needless to say.)

8) Get To Scrubbing! Lightly wipe down the outside surface of the CPAP machine that is unplugged. Then fill a sink or basin with warm water and a bit of light unscented shampoo or dish detergent (i.e. Dawn Original).

9) After all is said and done, you feel have a professional take a look and as if your machine functionality or Sleep Apnea has worsened, bring your CPAP machine to your own gear supplier.